EN
AR
FR
DE
IT
JA
KO
NO
PT
RU
ES
ID
TH
TR
MN
- Introduction
Introduction
The HXBVS-V2-PY4 stand type air mixer is mainly composed of a stand, a vane air motor, a coupling, as tirring shaft, a propeller type impeller and a control valve. It is designed for 5-20 litres buckets. The mixer part can be lifted andlowered by the air cylinder to adapt to different containers. The whole machine can be moved easily by the trolley. The speed of theair mixer can be adjusted by air inflow to meet the requirements of different working conditions. The air mixer is widely used forstirring chemical solutions such as ink, oil, glue, paint, etc.
| Mixer Model | HXBVS-V2-PY4 |
| Motor Model | HX2AM-V |
| Motor Power | 0.68 kW |
| Motor Material | Cast Iron |
| Max. Speed | 3000 rpm |
| Recommended Speed | 500-2000 rpm |
| 304 Shaft Size | Φ12.7×500 mm |
| 304 Impeller Diameter | 4 inches |
| Impeller Type | Propeller Type |
| Number of Impellers | 1 |
| Port Size | 1/4" NPT |
| Hose Diameter | O.D.=10 mm | I.D.=6.5 mm |
| Air Pressure | 0.4-0.8 MPa |
| Max. Air Consumption | 825 L/min |
| Mounting Type | Stand Type |
| Weight | 20 kg |
| Viscosity | ＜1000 cP |
| Mixing Capacity | 50-250 litres |
Notes
1.Use dry, clean and lubricated compressed air to drive the air mixer. The mixer has a F.R.L inside the control box.Make sure the lubricator is always filled with oil.
2. Before connecting to the ports, clean the compressed air connections with low pressure air to remove any dirt or debris.
3. Always use air lines that are the same size, or larger, than the air inlet port (refer to port size in the specifications chart).