All Categories
Air Mixers with Trolleys

Home /  Product  /  Air Mixer  /  Air Mixers with Trolleys

Generic Trolley Type Air Mixer HXGTC-V8-DPY8
Generic Trolley Type Air Mixer HXGTC-V8-DPY8

Generic Trolley Type Air Mixer HXGTC-V8-DPY8

  • Introduction

Introduction

The HXGTC-V8-DPY8 trolley type air mixer is mainly composed of a trolley, a vane air motor, a coupling,   as tirring shaft, two propeller type impellers and a control box with F.R.L and control valves inside. It is designed for 50-1000 litres containers. The mixer part can be lifted and lowered by the air cylinder to adapt to different containers. The whole machine can be moved easily by the trolley. The speed of the air mixer can be adjusted by air inflow to meet the requirements of different working conditions. The air mixer is widely used for stirring chemical solutions such as ink, oil, glue, paint, etc.

v8

Mixer Model HXGTC-V8-DPY8
Motor Model HX8AM-ARV-70
Motor Power 3.9 kW
Motor Material Cast Iron
Max. Speed 2500 rpm
Recommended Speed 500-2000 rpm
304 Shaft Size Φ20×1000 mm
304 Impeller Diameter 8 inches
Impeller Type Propeller Type
Number of Impellers 2
Port Size 1/2" NPT
Hose Diameter O.D.=16 mm | I.D.=12 mm
Air Pressure 0.4-0.8 MPa
Max. Air Consumption 4800 L/min
Mounting Type Trolley Type
Weight 115 kg
Viscosity <5000 cP
Mixing Capacity 50-250 litres

Notes

1.Use dry, clean and lubricated compressed air to drive the air mixer. The mixer has a F.R.L inside the control box. Make sure the lubricator is always filled with oil.

2. Before connecting to the ports, clean the compressed air connections with low pressure air to remove any dirt or debris.

3. Always use air lines that are the same size, or larger, than the air inlet port (refer to port size in the specifications chart).



×

Get in touch