All Categories
Air Mixers with Brackets

Home /  Product  /  Air Mixer  /  Air Mixers with Brackets

Air Mixer with Bracket HXIHB-V6-DFY16
Air Mixer with Bracket HXIHB-V6-DFY16
Air Mixer with Bracket HXIHB-V6-DFY16
Air Mixer with Bracket HXIHB-V6-DFY16

Air Mixer with Bracket HXIHB-V6-DFY16

  • Introduction

Introduction

The air mixer HXIHB-V6-DFY1 6 is mainly composed of a vane or piston air motor, a coupling, a stirring shaft, two folding impellers and a mounting bracket. It is suitable for 500-1000 litres IBC tank. The mixer can be fixed on the frame of the IBC tank. The folding impellers can enter into the tank through the bunghole of the tank. The speed of the air mixer can be adjusted by the air inflow to meet the requirements of different working conditions. The air mixer is widely used for stirring chemical solutions  such as ink, oil, glue, paint, etc.

dfy16

Mixer Model HXIHB-V6-DFY16
Motor Model HX6AM-ARV-54
Motor Power 3kW
Motor Material Cast Iron
Max. Speed 3000rpm
Recommended Speed 500-2000rpm
304 Shaft Size φ20×1000mm
304 Impeller Diameter 16 inches
Impeller Type Folding Type
Number of Impellers 2
Port Size 1/2" NPT
Hose Diameter O.D.=16mm | I.D.=12mm
Air Pressure 0.4-0.8MPa
Max. Air Consumption 3800L/min
Mounting Type Horizontal Bracket Mounting
Weight 32kg
Viscosity <2000cP
Mixing Capacity 1000litres

HXIHB-V6-DFY16 FIG.1HXIHB-V6-DFY16FIG.2


Notes

1. Install an automatic air line lubricator in the air line within 18 inches (0.5 meter)or as close as possible to the air motor. The lubricator needs to be installed upstream of the air motor so that the oil mist will be blown directly into the motor. Make sure the lubricator is always filled with oil.

2. Before connecting to the ports, clean the compressed air connections with low pressure air to remove any dirt or debris.

3. Always use air lines that are the same size, or larger, than the air motor inlet port (refer to port size in the specifications chart).


×

Get in touch